Solar Structures
Why opt for Salasar Engineering's Solar Structures?
Salasar Engineering's Solar structures advantages
1. Easy and fast to assemble
2. 25 years of maintenance free life
3. Strong Durable and Total Safety
4. Structures are well protected against adverse climatic conditions
5. Optimal surface treatment for high corrosive resistance (Hot dip galvanized up to 85 microns).
Salasar Engineering’s Module Mounting Structures are designed and engineered for each customer’s site specific conditions to minimize the field installation labor and require no filed welding, drilling or other on-site fabrication.
Salasar Engineering’s is manufactured under controlled conditions, in “State-of-the Art” manufacturing systems, adhering to safety and superior quality parameters.
SALASAR-C and SALASAR-Z PURLINS
are secondary members of steel structures which serve as the basic material of construction for fast-track projects. These purlins are categorized by high strength, yet low cost (as a result of the high strength to weight ratio). Purlins are supplied in required sizes and lengths with pre-punched holes for quick bolting. The production system deployed consists of international standard cold-roll forming technology using high quality machines with online measuring, cutting, punching and forming to provide assured dimensions and straightness, and an overall supreme quality product.
Advantages
- Very high strength-to—weight ratio: high strength – low cost
- More than 40% saving in steel
- More than 30% saving in overall construction cost
- Easy and low-cost handling and transportation
- Economy due to reduction in dead weight on the main frame structure
- Significantly reduce installation time
- Ability to span long lengths
- No site drilling or cutting required
- Maintenance free owing to application of proper surface finish
- Purlins are factory finished, cut to application of proper surface finish
- Continuous splay and splicing for better structural strength, stability and economy
- 45 degree(use degree sign) lip for better sectional modulus and easy nesting
Technical & Material Specification
- Thickness: 1.5mm to 3mm
- Length: Upto 12 METRE
- Material: CR Steel as per IS:513/ HR Steel as per IS: 1079
- Yield Strength: 250 MPa to 350 MPa
Features:
- Suitable for flat and slightly sloped roofs
- Suitable for several module dimensions with a panel width from 950 to 1050mm
- Total dead load of panels with steel structure and ballast below 10kg/m² of roof achievable
- Standard and angle regulation from 5⁰C TO 30⁰C Z and C Purlins / C Channels, bracings, angles and column post are members of Module Mounting structure. They are rolled formed bu using pre-galvanized, post galvanized or made of galvano steel.
Pre galvanized structure
- Thickness: 0.8 to 3 mm
- Material Yielding Sheet: 250 Mpa - 350 Mpa
- Line Coating: 120 – 550 GSM
- Material confirming to IS:277
Post galvanized structure
- Material Yielding Sheet: 250 Mpa - 350 Mpa
- Hot dip galvanization up to 85 microns/ 550 GSM
- Hot dip galvanization confirms IS:2629/ ASTM A153
Galvano Steel
- Thickness 0.8 - 1.2 mm
- Material Yielding Sheet: 250 Mpa - 550 Mpa
- Aluminum Zing Coating: AZ - 70 / AZ – 150
- Material confirms to ASTM, A792, SS80